Tag Archive for: #granvillecountyncnews

Granville County Board of Education Names New Superintendent

The Granville County Board of Education is pleased to announce the selection and appointment of Dr. Alisa McLean as the next superintendent of the Granville County Public Schools (GCPS). Dr. McLean will take office on July 19.

During the search process, the board carefully reviewed applications from a diverse field of 46 excellent candidates. Although many qualified candidates applied, the board felt that Dr. McLean’s leadership, experience, and dedication to students would best serve GCPS students, staff, and the community for years to come. The board is confident that Dr. McLean will lead the school system to even higher achievement. 

Dr. McLean has enjoyed a successful career in public education spanning over 20 years in North Carolina. Since 2016, she has served as the assistant superintendent for teaching, learning, and leadership for the Durham Public Schools. Prior to her current position, Dr. McLean served as an area superintendent for the Durham Public Schools (2014-2016). Dr. McLean also previously served as a school transformation coach with the N.C. Department of Public Instruction (2011-2014) and as an assistant superintendent in the Alamance-Burlington School System (2009-2011). She began her career in public education as an assistant principal and principal in Roxboro and Hillsborough, North Carolina.

Dr. McLean has an impressive academic background as well, including a bachelor’s degree in English education from Elizabeth City State University. She went on to obtain a master’s degree in educational administration and supervision from East Carolina University and a doctorate in educational leadership from the University of North Carolina at Chapel Hill. She also participated in and later served as a consultant and assistant director for the Principals’ Executive Program at the University of North Carolina at Chapel Hill.

Dr. McLean looks forward to the opportunity to lead the Granville County Public Schools and becoming an active member of the community. Dr. McLean  is the daughter of Dr. & Mrs. AC Robinson, Jr. of Elizabeth City, NC.  She and her husband, Attorney Frankie McLean are the proud parents of their daughter Imari, who is an ACC scholar track and field athlete and rising Senior at NC State University. Dr. McLean has issued the following statement about the position:

“I am both, excited and honored to join the Granville County Public Schools family and community.  Together, I know we will accomplish great things and surpass expectations for all of our students.  I truly believe the best is yet to come!”

Please join the board in welcoming Dr. Alisa McLean as the new superintendent of the Granville County Public Schools.

Granville County Board of Education Appoints Acting Superintendent

On Thursday, June 29, the Granville County Board of Education announced several important updates regarding key leadership positions at the district level.

 

Following the retirement of Dr. Dorwin L. Howard Sr. as Superintendent effective June 30, the Board appointed Dr. Michael A. Myrick, to serve as Acting Superintendent until the new Superintendent search process is finalized. Dr. Myrick serves as the Assistant Superintendent for Curriculum and Instruction and Student Services.

 

During this interim role, Dr. Myrick will assume the responsibilities as Superintendent and also take on the added duties associated with Maintenance & Facilities, Transportation and Safety.

 

Ms. Beth Day, Assistant Superintendent for Finance, will take on the added duties of Child Nutrition, and Custodial, Recycling/Energy Education and Warehouse Services.

 

Both Dr. Myrick and Ms.. Beth Day are contractually employed through June 30, 2018.

 

Ms. Betty Hicks was named Executive Assistant to the Superintendent and Clerk to the Board of Education effective July 1. Ms. Hicks has more than 17 years experience working with Granville County Public Schools, having served in school-based support roles, and most recently as the Executive Assistant to the Assistant Superintendent for Human Resources and Operations.

 

Board Chairman Thomas Houlihan offered his comments on the changes, “The Board has been working very hard over the past several months to find the best possible candidate to lead our schools as Superintendent. These adjustments in personnel will help ensure continuity of services for our students and the community. Once the new Superintendent is announced, we can continue the progress toward transforming our schools to be the best in the state, and even the nation. Our students deserve nothing less.”

 

The Granville County Board of Education has scheduled a special called meeting on Thursday, July 6 at 6:00 pm for the purposes of personnel.  The meeting will take place at 101 Delacroix St. Oxford, N.C.

VGCC celebrates first graduates supported by ‘VanGuarantee’ scholarship

HENDERSON, N.C. — When six students walked across the stage to receive their degrees at Vance-Granville Community College’s May commencement exercises, they quietly made history. They were among the first graduates of the college who had received the “VanGuarantee” scholarship to help eliminate any financial barriers standing between them and their academic goals.

The innovative scholarship program was first announced in 2016 by the president of the college, Dr. Stelfanie Williams, with the first scholarships being awarded in the fall 2016 semester. The VanGuarantee was made possible by a $1.6 million bequest to VGCC from the estate of Wilbert A. Edwards, a resident of Oxford at the time of his death and a native of Vance County. The gift, announced in 2015, is the second largest in the history of the college. 

Three of the VanGuarantee recipients participating in Commencement were graduates of the Associate Degree Nursing program: Brittany Champion of Creedmoor, Courtney Humphries of eastern Granville County and Erin Woodlief of Franklinton. Alicia Toler of Raleigh, a former Granville County resident, graduated with an Associate in Arts degree. Kristen Honaker of Henderson completed a degree in Pharmacy Technology. Tanisha Silver of Warrenton graduated from the Medical Office Administration degree program.

“Receiving the VanGuarantee meant a lot to me,” Silver reflected. “I received a community college grant for the fall 2016 semester, but I still didn’t have enough to pay for my books. I was told about the VanGuarantee scholarship, and I was ecstatic about it. It has helped me out a lot, because it has made it possible for me to finish school.” Silver is currently in the job market for employment in a doctor’s office or hospital setting and is considering continuing her education at the bachelor’s degree level. A former certified nursing assistant and a mother, she said she waited until all of her children were in school to work on advancing her own career through education.

Toler said she was very appreciative of the opportunity that the VanGuarantee provided her. She intends to transfer into a four-year university to study nursing. “Had it not been for the VGCC Financial Aid Office staff, particularly Ms. Tonya Strum, telling me about the VanGuarantee scholarship, I don’t think I would have been able to stay in school,” Toler said.

At least two graduates are already employed, Champion in the emergency room at Duke Regional Hospital in Durham and Humphries at Maria Parham Health in Henderson, working in Outpatient Surgical Services. “I am very thankful that I was able to receive the VanGuarantee this year,” Humphries said. “It has helped me finish my last two semesters of RN school. I am truly blessed beyond words!”

The VanGuarantee is designed to cover tuition, student fees and/or textbooks for eligible students whose financial needs are unmet by federal financial aid and other means of support. The program is one of a number of “promise” or “guarantee” programs across the country, created by individual colleges or by states, in response to growing concerns from policymakers and students about the rising cost of higher education. In 2016, the VanGuarantee was recognized by the White House and national groups focused on college affordability.

Some college promise programs are open only to recent high school graduates, but the VanGuarantee applies to all eligible adults in the four counties, reflecting VGCC’s longstanding tradition of helping adults retrain for new careers at any age.

Among the eligibility requirements for the VanGuarantee, students must reside in the college’s service area (Vance, Granville, Franklin and Warren counties) and qualify for in-state tuition. Eligible students must enroll in at least nine credit hours per semester in any VGCC curriculum program and not already possess a post-secondary degree from any college or university. They must first apply for and meet the eligibility requirements for federal and state financial aid programs. Next, they apply for endowed VGCC scholarships. When students still lack the funds to pay for their education after exhausting those and other sources, the VanGuarantee program helps to fill the gap. That makes the program an example of what is often called a “last-dollar scholarship.”

Once enrolled in the VanGuarantee program, students must maintain at least a 2.5 grade point average (GPA) to continue receiving the scholarship.

For more information on applying for the VanGuarantee, students can visit www.vgcc.edu/fao/vanguarantee.

–VGCC–

Granville Teachers and Manufacturing Leaders hold summit

On Monday, June 19, a group of teachers from GCPS joined leaders from local advanced manufacturing companies for a “Pipeline to Employment” summit.  The purpose of the event was to strengthen collaboration and understanding between local Advanced Manufacturing businesses and our school district.

Advanced Manufacturing is one of the fastest growing sectors of our local economy, and there are an increasing number of well-paying careers available.  Most of these require some type of post-secondary education offered through our community college system or specialized industry training. Local Career and Technical Education (CTE) courses offer pathways into these areas as well.  It was shared that starting salaries for students with specialized credentials or 2-year degrees can start as high as $40 thousand a year, with excellent benefits and lots of opportunities for overtime.  Many of these careers can also be extended with additional BS degrees and beyond with higher levels of engineering, IT or biotech sector jobs.

During the event, educators heard from a variety of speakers, including a presentation from Alexis Franks of NC Works, Ms. Judy Woodson-Bruhn, Career Resource Specialist & Labor & Economics Analyst, from the NC Department of Commerce, and Michael McConchie, Certified Business Coach, M&M Consultants. They also had a chance to participate in industry roundtables, where representatives from twelve local companies presented information about their products and workforce needs.

Representatives from the following companies attended:

Altec

SunRock

PRM

Bridgestone Bandag

Delhaize America

Plastic Ingenuity

CertainTeed

Revlon

Stay Online

Gate Precast

NT Techno

Summit Engineering and Design

Dr. Stan Winborne, Director of the Career and Technical Education program explained the importance of the event, “Educators don’t often have an opportunity to hear first hand from local business and industry about their workforce needs.  This was a fantastic way to make direct connections between the classroom and the workplace.  The teachers who participated now have great information about all of the career opportunities to share with their students.  Not many people realize how technically advanced most of these jobs are, and they would be shocked to learn just how much money someone can make with 2 years or less of technical training – no 4-year degree required.  It’s amazing the opportunities in our own back yard.  I am grateful to the time these business leaders gave to this event.  It is evident they are truly invested in the future of our community.”

Several County Commissioners were in attendance, and Chairman Tim Karan and Commissioner Dr. Tony Cozart both offered remarks supporting partnerships to help better prepare our young citizens for careers in our local economy.  Board Chair Dr. Houlihan was also on hand and praised the efforts to bring our schools and employers together.  This event was co-planned by Mr. Harry Mills, Economic Development Director for Granville County, and the Career and Technical Education program of GCPS, under the leadership of Ms. Tamara Rodebaugh, Career Development Coordinator.

Dr. Stan Winborne
Director of High Schools
Director of Career & Technical Education Program
Public Information Officer
Granville County Schools

Granville County Elected Officials and Staff Tour Bladen County Law Enforcement Facility

Oxford, NC, June 23, 2017 – In preparation for future construction of its own law enforcement complex, Granville County elected officials and staff toured the recently constructed Bladen County, North Carolina, Law Enforcement Facility on Wednesday, June 22. The Bladen County facility, yet to be occupied, was toured by four Granville County Commissioners- Tim Karan, Sue Hinman, Zelodis Jay, and David Smith- as well as Granville County Sheriff Brindell Wilkins, County Manager Michael Felts, Sherwood Boyd (Sheriff’s Office Chief Deputy), Trent Brummitt (911 Center Manager), Jimmy Hayes (Detention Administrator), and Edward Cash (Lead Detention Shift Supervisor). Todd Davis of Moseley Architects also attended the tour.

This visit will make the third tour of a law enforcement facility by Granville County leadership, though it is the first facility that was unoccupied at the time.

###

About Granville County Government:

Granville County Government enhances the quality of life for the citizens of the County by providing an array of services through a responsive, effective, and efficient local government. Learn more at www.granvillecounty.org. Follow Granville County Government on Facebook @GranvilleCountyGov.

District Attorney’s July 2017 Schedule

DISTRICT ATTORNEY’S SCHEDULE JULY 2017

 

Mon, July 3 Warren Trial Court (Rozier) – Fuller, Raymond

Franklin District Court (Keith) – Gardner, Roberson

Vance District Court (Burnette) – Erdmann, Watson/Hargrove

Granville District Court (Davis) – Gregory, Dickerson

Granville County Clerk’s Office Hours, Attorneys, 2:00-4:00 pm – Gregory

 

Tues, July 4 Holiday

 

Wed, July 5 Granville District Court (Stevenson) – Erdmann, Dickerson

Granville Juvenile Court (Burnette) – Putney

Warren District Court (Davis) – Louis, Raymond

Granville County Clerk’s Office Hours, Public, 2:00-4:00 pm – Putney

Franklin Trial Prep – Gardner, Gregory

 

Thurs, July 6 Franklin Juvenile Court (Keith) – Putney

Vance District Court (Stevenson) – Pelfrey, Watson/Hargrove

Granville Dispo Court (Thompson) – Sellars, Louis, Erdmann, Dickerson, Brickhouse

Franklin Trial Prep – Gardner, Gregory

 

Fri, July 7 Vance Juvenile Court (Thompson) – Louis

Franklin Trial Prep – Gardner, Gregory

 

Mon, July 10 Franklin Trial Court (Gray) – Gardner, Gregory, Johnson

Granville Trial Court (Hight) – Waters, Capps, Garrett

##Franklin District Court (Stevenson) – Louis, Roberson

Vance District Court (Burnette) – Sellars, Watson/Hargrove

Granville District Court (Thompson) – Erdmann, Dickerson

 

Tues, July 11 **Franklin District Court (Thompson) – Louis, Sellars, Roberson

Vance District Court (Stevenson) – Fuller, Watson/Hargrove

Warren Juvenile Court (Davis) – Putney

 

Wed, July 12 ##Granville District Court (Stevenson) – Louis, Dickerson

Warren District Court (Burnette) – Erdmann, Pelfrey, Raymond

 

Thurs, July 13 Vance District Court (Wilkinson) – Erdmann, Watson/Hargrove

Warren CMS Prep – Fuller

 

Fri, July 14 Warren CMS Prep – Fuller

 

Mon, July 17 Warren CMS Court (Rozier) – Fuller, Pendergrass, Raymond

Franklin District Court (Davis) – Gregory, Roberson

Vance District Court (Burnette) – Putney, Watson/Hargrove

**Granville District Court (Stevenson) – Sellars, Dickerson

Vance CMS Prep – Pelfrey, Erdmann, Louis

 

Tues, July 18 Vance Probation Court (Rozier) – Gregory, Pendergrass

Franklin District Court (Stevenson) – Sellars, Roberson

Vance District Court (Davis) – Louis, Fuller, Watson/Hargrove

Granville Juvenile Court (Burnette) – Putney

Vance CMS Prep – Pelfrey, Fuller, Erdmann, Louis

Vance County Clerk’s Office Hours – Attorneys – 2:00-4:00 pm – Gregory

 

Wed, July 19 Vance CMS Court (Rozier) – Pelfrey, Fuller, Erdmann, Louis, Pendergrass, Allen

Granville District Court (Burnette) – Sellars, Dickerson

**Warren District Court (Stevenson) – Putney, Raymond

Vance County Clerk’s Office Hours – Public – 2:00-4:00 pm – Gregory

 

 

Thurs, July 20      Vance CMS Court (Rozier) – Pelfrey, Fuller, Erdmann, Pendergrass, Allen

Franklin Juvenile Court (Davis) – Gregory

Vance Dispo Court (Stevenson) – Sellars, Putney, Louis, Watson/Hargrove

Franklin County Clerk’s Office Hours, 2:00-4:00 pm – Gregory

Franklin CMS Prep – Gregory

 

Fri, July 21 Franklin Dispo Court (Stevenson) – Fuller, Erdmann, Gregory, Tart, Roberson

Franklin CMS Prep – Gregory

 

Mon, July 24 Franklin CMS Court (Rozier) – Gardner, Gregory, Pendergrass, Johnson

Franklin District Court (Keith) – Sellars, Roberson

Vance District Court (Thompson) – Pelfrey, Watson/Hargrove

Granville District Court (Davis) – Fuller, Dickerson

Granville CMS Prep – Sellars, Putney

 

Tues, July 25 Franklin CMS Court (Rozier) – Gardner, Hunter, Pendergrass, Johnson

Franklin District Court (Stevenson) – Louis, Pelfrey, Roberson

**Vance District Court (Keith) – Erdmann, Watson/Hargrove

Warren Juvenile Court (Davis) – Fuller

Granville CMS Prep – Sellars, Putney

 

Wed, July 26 Granville CMS Court (Rozier) – Sellars, Putney, Pendergrass, Garrett

Granville District Court (Stevenson) – Gardner, Gregory, Dickerson

Warren District Court (Keith) – Fuller, Raymond

 

Thurs, July 27 Granville CMS Court (Rozier) – Sellars, Putney, Pendergrass, Garrett

Vance District Court (Stevenson) – Gardner, Watson/Hargrove

Vance Trial Prep – Pelfrey, Fuller

 

Fri, July 28 Vance Juvenile Court (Thompson) – Putney

Vance Trial Prep – Fuller

 

Mon, July 31 Vance Trial Court (Hobgood) – Pelfrey, Fuller, Allen

Franklin District Court (Burnette) – Gardner, Roberson

Vance District Court (Davis) – Putney, Watson/Hargrove

##Granville District Court (Keith) – Sellars, Dickerson

 

**mediator available**

##9:30 am regular docket, PLUS POSSIBLE 2:15 pm DWI docket##

VGCC Receives Largest Grant in School History

CREEDMOOR, N.C.Vance-Granville Community College today announced it received an in-kind software grant from Siemens PLM Software, with a commercial value of $31 million.

The in-kind grant gives students access to the same technology that companies around the world depend on every day to develop innovative products in a wide variety of industries including automotive, aerospace, machinery, shipbuilding, high-tech electronics and many more.

Graduates with this type of software training are highly-recruited candidates for advanced technology jobs.

The in-kind grant was provided by the Siemens PLM Software’s academic program that delivers PLM software for schools at every academic level. Siemens PLM Software is a leading global provider of product lifecycle management (PLM) software and services.

The in-kind grant for VGCC includes Siemens PLM Software’sTecnomatix® portfolio, the industry-leading digital manufacturing software.

This is in addition to a previous in-kind grant that included the company’s Solid Edge® software, an intuitive product development platform for accelerating all aspects of product creation, including 3D design, simulation, visualization, manufacturing, and design management.

Both software packages will be used by students in VGCC’s Mechatronics Engineering Technology degree program.

“Vance-Granville Community College would like to thank Siemens PLM Software for this generous grant of advanced engineering software that enables our students to better prepare for successful advanced technology careers,” said Dr. Stelfanie Williams, the president of VGCC. “By using the same technology in the classroom that is used by companies all over the world to develop a wide variety of products, our students gain important real-world experience during their studies that will serve them well after graduation.”

“Despite an immediate, critical need for qualified technology-trained professionals in manufacturing, our customers have difficulty finding qualified candidates,” said Dora Smith, global director, Academic Partner Program, Siemens PLM Software. “Working with Vance-Granville Community College, Siemens PLM Software is helping prepare students with the knowledge and experience to fill this skills gap and become highly qualified employees.”

About Vance-Granville Community College
Vance-Granville Community College, one of the 58 institutions of the North Carolina Community College System, is the local source for higher education and training in Vance, Granville, Franklin and Warren counties, north of the Research Triangle. Established in 1969, VGCC today serves students at four campuses (one in each county of the service area) and online. The college offers more than 40 curriculum programs, as well as occupational certifications, continuing education, adult education, customized training for employers and the first two years of a four-year degree. VGCC’s Mechatronics Engineering Technology degree program is based at the college’s South Campus, located near Creedmoor in southern Granville County. For more information, visit www.vgcc.edu.

–VGCC–

Legal note

Note: Solid Edge and Tecnomatix are trademarks or registered trademarks of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries.

Granville County Mailbox the victim of Vandalism

TO: News Media

FROM: Granville County Crime Stoppers  

DATE: June 20th, 2017

SUBJECT: VANDALISM

Sometime between Friday, June 8th, late evening and Saturday, June 9th, 2017 mid-afternoon hours an unknown person or persons unlawfully went upon private property off Range Road, Stem, NC and criminally vandalized a mailbox.

If you have information concerning this incident, please contact the Granville County Sheriff’s Office at 919-693-3213 or call Crime Stoppers 919-693-3100.

THE GRANVILLE COUNTY CRIME STOPPERS BOARD OF DIRECTORS HAS AUTHORIZED THE PAYMENT OF A REWARD OF UP TO $1,000 FOR INFORMATION LEADING TO THE ARREST/INDICTMENT(S) OF PERSON(S) RESPONSIBLE FOR THIS CRIME.  IF YOU HAVE INFORMATION CONCERNING THIS CRIME OR ANY OTHER SERIOUS CRIME(S) IN GRANVILLE COUNTY.  YOU ARE ASKED TO CALL THE GRANVILLE COUNTY CRIME STOPPERS IN OXFORD AT 919-693-3100.

Local Teachers Attend Summer Professional Development Training

Vance County Schools

For Immediate Release

June 20, 2017 

Career and Technical Education teachers in Vance County Schools are joining their counterparts from Granville, Franklin and Warren counties in a three-day “AMSTA Summer Cruisers” professional development training this week.

The educators are shown in the accompanying photo as they worked on an activity during their “Lean Manufacturing” training today in the Vance County Schools’ Administrative Services Center.

They began the training on June 19 and toured the Dill Air Controls and Revlon manufacturing plants in Granville County. They also heard presentations on youth services and how to best prepare students to be career and college ready. In addition to the manufacturing training session today, they also are touring the bioMerieux plant in Durham County. They will conclude their participation in the AMSTA event tomorrow at Franklinton High School in Franklin County, where they will meet with state commerce officials and listen to educational presentations including a session entitled, “School Choice and the Impact on Public Schools.”

Harry Mills Graduates from REDI

Harry Mills, Granville County Economic Development Director, graduated in May from the Rural Economic Development Institute (REDI), an intensive, three-month training program designed for rural community leaders. Rural Center President Patrick Woodie presented certificates to the program’s 31 graduates during a ceremony at the NC Rural Center.

For 27 years, REDI has helped rural leaders improve their leadership skills and increase their knowledge of economic and community development strategies, equipping them with the tools they need to tackle the issues facing their rural communities.

This year’s class participants included elected officials, economic development professionals, business owners, and civic leaders. More than 1,100 rural leaders have graduated from REDI since the program began in 1989.

Cover Photo By: York Wilson