General Statute 143-215.1C requires that the owner or operator of any wastewater collection or treatment works to issue a press release when an untreated wastewater discharge of 1,000 gallons or more reaches surface waters.
In accordance with that regulation, the following news release has been prepared and issued to media in the affected county: Franklin.
Franklin County Public Utilities experienced a discharge of untreated wastewater from the Youngsville Regional pump station in Youngsville. The spill was a result of rain on Friday, December 28, 2018. The spill occurred at 4 p.m. on December 28, 2018, and discharged until 6 p.m. on December 28, 2018. The discharge of wastewater was estimated to be 3,600 gallons and it entered into an unnamed tributary of Richland Creek which is a tributary of the Neuse River Basin. Franklin County Public Utilities staff were dispatched to the site and started clean up after the overflow stopped.
The division of Water Quality was notified of these events on December 29, 2018, and is reviewing the matter. For additional information concerning this event, please contact Chris Doherty, Franklin County Public Utilities Director at (919) 556-6711.
https://wizs.com/wp-content/uploads/2017/07/wizsfbresize_0001s_0056_Franklin-County-NC.jpg.png265504WIZS Staffhttps://wizs.com/wp-content/uploads/2018/09/wizswebsitelogoimage.pngWIZS Staff2018-12-31 16:55:362018-12-31 16:55:36Franklin Co. Public Utilities Reports Discharge of Untreated Wastewater in Youngsville
Vance-Granville Community College’s interim president, Dr. Gordon Burns, has honored a team of faculty members in the Welding Technology program at the Franklin Campus by awarding them the “Vanguard Cup” for excellence in education.
The department became the fourth recipients of the cup, an honor created by the President’s Office to recognize “exceptional team performance toward the college mission, vision and strategic plan.” The Vanguard Cup is awarded to a department that meets or exceeds the targets on improvement strategies designed to further department or instructional goals, Dr. Burns said in making the presentation on Thursday, Dec. 13, at a college event in the Civic Center.
Above: Members of the VGCC Welding Department faculty pose with the “Vanguard Cup,” awarded to the Welding program at Franklin Campus for educational excellence by Dr. Gordon Burns, interim president of the college. From left are Dr. Burns; Rusty Pace, program head/instructor for Welding Technology; Allen Tharrington, instructor for Welding at Franklin Campus; and Luke Gravel, instructor for Welding at Main Campus. (VGCC photo)
Rusty Pace, program head and instructor for Welding, and Allen Tharrington and Luke Gravel, instructors, were honored for the Franklin Campus achieving a student course success rate of 100 percent, the president noted.
“The Welding program at the Franklin Campus achieved this superior student course success rate by advancing student skill development through increased repetition and by working more closely with local employers,” said Dr. Burns. “The local employers provided student tours of their respective campuses, served as guest lecturers and hired program graduates.”
In addition to the cup, the department receives up to $10,000 for use on equipment, professional development, adjunct instructors, or other approved purposes for state funds, as well as a luncheon for the area.
Runners-up for the cup were announced as the Math Department faculty who increased the student success rate of Math 171 students by 8 percent by offering supplemental instruction and maintaining performance rates in Math 172; and the Accounting/Business Administration/Entrepreneurship faculty who increased retention rates by connecting with students during registration periods and over the summer
VGCC offers degree, diploma and certificate programs in Welding Technology. In addition to the classes at Franklin, classes are offered on the Main Campus in Vance County. For more information, contact Rusty Pace at (252) 738-3375 or pacer@vgcc.edu.
https://wizs.com/wp-content/uploads/2018/12/VGCC-Vanguard-Cup-2018.png265504WIZS Staffhttps://wizs.com/wp-content/uploads/2018/09/wizswebsitelogoimage.pngWIZS Staff2018-12-24 11:55:052018-12-24 11:55:05VGCC’s Welding Technology Program at Franklin Earns Vanguard Cup
Cyrus Jover of Henderson, the first participant in Vance-Granville Community College’s new apprenticeship partnership with Frigi-Temp of Youngsville, took third place in the North Carolina State Fair HVAC Apprenticeship Competition in October.
“I’m extremely proud of Cyrus and the way he represented the Frig-Temp team,” said Cory Thornton, chief operating officer of the commercial heating, ventilation and air conditioning (HVAC) company.
Jover joined the apprenticeship program earlier this year. Already enrolled in the Air Conditioning, Heating and Refrigeration Technology program at VGCC, he had worked in the HVAC field for almost four years before he became an apprentice, but only in residential installation.
Cyrus Jover of Henderson, a VGCC student who participates in the VGCC apprenticeship program through Frigi-Temp of Youngsville, placed third in the 14th Annual Apprentice HV/AC-R Contest at the N.C. State Fair in October. In the photo above, Jover is being tested on his brazing skill level and safety precautions during one section of the day-long competition. Event organizers gave instructions and then, as shown in the background of the photo, judged students on how well they soldered while also observing their steps to follow good safety measures. (Photo Credit: VGCC)
The 14th Annual Apprentice HV/AC-R (Heating, Ventilation/Air Conditioning – Refrigeration) Contest was open to the first 20 applicants, registered in a program recognized by the N.C. Department of Commerce, who have completed less than 8,000 hours of training. Eight apprentices participated and six were awarded prizes. Third place awarded a prize of $175 out of a total of $1,325 in prizes to the top finishers. The top three finishers received extra prizes with Jover winning a tool bag, hand tools, and a drill set in addition.
The contest was designed to promote interest among apprentices in the skilled construction trades, according to the NC State Fair organizers. “This contest dramatizes a ‘job training program’ through which ApprenticeshipNC has assisted voluntary efforts of industry to meet their needs for skilled workers,” apprenticeship director Kathryn Castelloes said. “These skilled craftworkers have contributed significantly to the economic growth of North Carolina.”
A program of the North Carolina Community College System, ApprenticeshipNC seeks to “ensure the state has an innovative, relevant, effective and efficient workforce development system that develops adaptable, work ready, skilled talent to meet the current and future needs of works and businesses to achieve and sustain economic prosperity,” NCCCS says on its website.
Jover’s entry into the competition came at the suggestion of NCCCS staff, Thornton said. “Cyrus was signed up for the event even before he knew about it,” Thornton added, noting that it was a great experience for Jover and the company.
“I was very nervous going in because I had never competed in a contest like this,” Jover said. “You do not know how skilled your competitors are because they are strangers. You have no idea what to expect from them or the contest. I was also nervous because I knew that Vance-Granville and Frigi-Temp were depending on me to represent them well.”
“Despite the pressure and nerves,” he added, “the competition was a fun learning experience because it shows you how you rank when up against your peers. It also shows you how much more there is to learn so that you can be the best.” Thornton added that the contest began at 8 a.m. and lasted until 3 p.m.
Cory Thornton, chief operating officer for Frigi-Temp in Youngsville, left, celebrates with Cyrus Jover, a student in the Air Conditioning, Heating & Refrigeration Technology program at VGCC who is also an apprentice with Frig-Temp. Jover placed third in the 14th Annual Apprentice HV/AC-R Contest at the N.C. State Fair in October. (Photo Credit: VGCC)
“If I could hire five more team members just like him I would do so in an instant,” Thornton said. ”His drive to become a professional, his humility, his work ethic and the way that he chooses to work as a true team player is something I truly admire about him. I am humbled that I get to work at Frigi-Temp alongside Cyrus and many others just like him.”
Jover is originally from the Philippines, where he earned a college degree in Biology before coming to the United States seven years ago, at age 20. Here, he found that the HVAC field had numerous job openings. He enrolled at VGCC, first as a part-time and then a full-time student. Now, he is done with almost all of his classwork and spends most of his time working at Frigi-Temp. He sometimes works a full 40 hours per week at the company while continuing his studies.
Thornton said the apprenticeship program is going very well while “still in its infancy.” “We have high hopes for the future and look forward to hiring several more apprentices over the next year,” he said.
As for next year’s competition at the State Fair, Thornton says Frigi-Temp will be ready for another round. “We weren’t able to coach Cyrus prior to the event and, with this being the first time, none of us any idea what to expect,” he said. “He did an excellent job by placing in third and next year we are looking forward to him taking first place.”
Michael Whittemore, program head for Air Conditioning, Heating & Refrigeration at VGCC, shared in Thornton’s excitement about Jover’s accomplishment. “Cyrus is exactly as Cory describes him. He is an excellent student and he makes Vance-Granville proud, not only for this contest but also for the professional manner in which he performs as an apprentice at Frigi-Temp,” he said.
Students interested in enrolling in the program can contact Whittemore at whittemorem@vgcc.edu or (252) 738-3214.
Employers who are interested in partnering with VGCC on apprenticeships are encouraged to contact Ken Wilson, project manager for VGCC’s TechHire grant program, at wilsonk@vgcc.edu or (252) 738-3259.
https://wizs.com/wp-content/uploads/2018/12/Cyrus-Jover.png265504WIZS Staffhttps://wizs.com/wp-content/uploads/2018/09/wizswebsitelogoimage.pngWIZS Staff2018-12-21 17:00:002018-12-21 17:00:00VGCC Apprentice at Frigi-Temp Places Third in State Fair Contest
Robert J. Higdon, Jr., United States Attorney for the Eastern District of North Carolina, announces that a federal grand jury in Raleigh has returned indictments charging BRAYAN ALEXANDER FUNEZ-ESPINOZA, age 28, of Mexico, ROMERO FLORES-AGUILAR, age 30, of Mexico, JESUS GARCIA HERNANDEZ, age 43, of Mexico, RODOLFO ROA-SAUCEDO, age 35, of Mexico, and JUAN ZARAGOZA-ZARAGOZA, age 36, of Mexico, with Illegal Reentry of a Deported Alien.
If convicted of illegal reentry of a deported alien, FUNEZ-ESPINOZA, previously deported twice and found in Wake County, FLORES-AGUILAR, previously deported twice and found in Johnston County, GARCIA-HERNANDEZ, previously deported three times and found in Franklin County, ROA-SAUCEDO, previously deported twice and found in Pitt County, and ZARAGOZA-ZARAGOZA, previously deported four times and found in Beaufort County, would face maximum penalties of two years’ imprisonment, a $250,000 fine, and a term of supervised release following any term of imprisonment.
The charges and allegations contained in the indictments are merely accusations. The defendants are presumed innocent unless and until proven guilty in a court of law.
The cases are being investigated by ICE’s Enforcement and Removal Operations and Homeland Security Investigations.
News releases are available on the U. S. Attorney’s web page at www.usdoj.gov/usao/nce. Follow us on Twitter @USAO_ENDC.
https://wizs.com/wp-content/uploads/2017/10/U.S.-Department-of-Justice.jpg265504WIZS Staffhttps://wizs.com/wp-content/uploads/2018/09/wizswebsitelogoimage.pngWIZS Staff2018-12-21 16:58:392018-12-21 16:58:39Five Aliens Indicted on Illegal Reentry Charges; One Found in Franklin Co.
The State Board of Community Colleges has approved the appointment of Dr. Rachel Desmarais as president of Vance-Granville Community College.
She will begin her tenure as the seventh president in the college’s history on Monday, Jan. 28, 2019, according to Danny W. Wright, chair of the VGCC Board of Trustees. The action of the State Board came at its monthly meeting on Tuesday, Dec. 18, at the North Carolina Community College System offices in Raleigh.
Currently the executive vice president and chief operating officer of Forsyth Technical Community College in Winston-Salem, Dr. Desmarais was selected for her new position by the VGCC trustees on Dec. 5. She was among nearly 90 applicants for the post.
The new president succeeds Dr. Stelfanie Williams who left in August to become the vice president for Durham affairs at Duke University. Dr. Gordon Burns, retired president of Wilkes Community College, is serving as interim president for VGCC until Dr. Desmarais takes office.
The State Board of Community Colleges has approved the appointment of Dr. Rachel Desmarais as president of Vance-Granville Community College. She will begin her tenure as the seventh president in the college’s history on Monday, Jan. 28, 2019.
https://wizs.com/wp-content/uploads/2018/12/Dr.-Rachel-Desmarais.png265504WIZS Staffhttps://wizs.com/wp-content/uploads/2018/09/wizswebsitelogoimage.pngWIZS Staff2018-12-20 16:58:012018-12-20 16:58:01State Board of Community Colleges Approves Appointment of Dr. Desmarais
With a busy Christmas and New Year holiday travel week being predicted, the N. C. Department of Transportation is suspending most road and lane closures on interstates, U. S. and N.C. routes across the state from Friday, Dec. 21, to Wednesday, Jan. 2.
There will be some exceptions where construction conditions make it unsafe to open all lanes, such as where a bridge is being replaced, or lanes are being constructed or rebuilt. Drivers need to be alert for any lane closure signs.
To help make trips safer and cut back on distracted driving, NCDOT and GEICO are teaming up to provide “Safe Phone Zones” throughout the holiday and into 2019. While GEICO sponsors the initiative, NCDOT has designed all 58 rest areas across the state as Safe Phone Zones to encourage drivers to take advantage of their use.
These facilities are strategically located along major highways, so accessing them is very easy to allow drivers to get out of traffic and safely use their smartphones and tablets to access information or even to send text messages, which is illegal while driving in North Carolina and 46 other states. Even a glance at a cell phone while driving is considered distracted driving and could easily lead to a tragic crash.
Travelers can also make their trip better by checking on the status of their planned route in advance by going to DriveNC.gov to see if it will be clear. Once underway, a stop at one of the Safe Phone Zone locations provides a chance to check the route again to see if anything has changed.
DriveNC.gov provides road condition updates by route, county or region, updated 24 hours a day with possible changes, including the travel impact of a crash or bad weather. In addition to checking the DriveNC website, another option to get updates during daytime hours is to call 511 to get live operators to provide travel assistance.
Here are some additional tips for safe driving during the holiday season:
Leave early to get a head start, and travel at non-peak hours if possible, as the weekends before Christmas and New Year’s Day will be the heaviest traffic congestion periods for most of the state, especially on interstates such as I-95, I-77, I-85, I-40 and I-26;
Use alternative routes if possible to avoid traffic congestion;
Allow extra time for your trip, regardless of the route you choose;
To avoid drowsy driving, travel at times you are normally awake and take frequent breaks, taking advantage of the state’s rest areas;
Pay attention to your surroundings and other vehicles nearby, and avoid distracted driving; and
All drivers and passengers must be wearing their seatbelts; it’s the law.
For real-time travel information, visit DriveNC.gov or follow NCDOT on Twitter.
https://wizs.com/wp-content/uploads/2018/11/NCDOT-Logo.png265504WIZS Staffhttps://wizs.com/wp-content/uploads/2018/09/wizswebsitelogoimage.pngWIZS Staff2018-12-19 16:54:512018-12-19 16:54:51NCDOT to Suspend Most Construction During Holidays Beginning Dec. 21
Vance-Granville Community College’s Mobile Food Truck Entrepreneurship classes return to the college’s Main Campus in Vance County starting in January with four new seminars on food service.
Sponsored by VGCC’s Small Business Center, students can take all or as many of the classes they choose. Each of the free classes is scheduled in Building 7 on Main Campus on a Monday evening in the months of January through April.
Above: Ray Chow is the founder of Hibachi Xpress and Catering by Ray.
Ray Chow, founder of Hibachi Xpress and Catering by Ray, will again serve as the instructor for the series. A graduate of N.C. State University, Chow started Hibachi Xpress restaurant in Cary and expanded to three locations, as well as managing some of his family’s other restaurants in the Raleigh and Wilmington areas. He has worked in restaurants since he was seven years old.
Seven years ago, Chow expanded his restaurant and catering business with the addition of a food truck to participate in different festivals and large gatherings. The popularity of food trucks has grown, and, in 2014, Hibachi Xpress shifted focus towards catering and the food truck business, moving away from the brick and mortar stores.
Chow is also a co-founder of “foosye,” a startup tech company building innovative technology applications tailored to the food truck industry.
The first in the series — “Let’s Get Cooking: Food Truck or Restaurant?” — will explore the differences in what it takes to start a food truck or a restaurant and continue operating one successfully. The Jan. 14 seminar is designed for those who want to realize their passion to be a small business owner in the food service industry.
The second seminar — “The 10 Hats of a Food Service Entrepreneur” — is being held on Feb. 11. Just because a person has a passion for cooking doesn’t mean he or she will be successful at owning a food truck or restaurant business, Chow said. This seminar will detail the many roles or “hats” entrepreneurs have to be able to juggle to succeed in business.
Above, the Hibachi Xpress food truck is owned by Ray Chow, who will be the instructor for the four VGCC Mobile Food Truck Entrepreneurship classes in January through April.
The March 11 workshop will be devoted to “Food Service Marketing: Your Customers Can’t Buy From You If They Can’t Find You.” Those exploring the food service industry will have an opportunity to learn various ways to market their food business to improve their chances of success.
On April 8, the topic of “Keeping Your Food Truck Business Running” will take a closer look at the need for flexibility and proper planning. “Imagine putting wheels on a restaurant you built,” said Chow. “There are things that will fall, slip, break down, move or not work when you add in the mobility of a food truck operation. Learn how things will end up on the floor when you arrive at your destination when not properly secured or planned.”
Participants in the program will also be required to sign up as clients of the VGCC Small Business Center, which is free of charge.
The deadline to register for each class is one week prior to the date of the class. For more information and to register, contact the VGCC Small Business Center at (252) 738-3240 or smallbusiness@vgcc.edu.
https://wizs.com/wp-content/uploads/2018/12/Hibachi-Express-Food-Truck.png265504WIZS Staffhttps://wizs.com/wp-content/uploads/2018/09/wizswebsitelogoimage.pngWIZS Staff2018-12-19 16:53:402018-12-19 16:53:40VGCC Announces Four New Classes for Food Truck Entrepreneurs
-Information courtesy Esther J. McCrackin, City Clerk, City of Henderson
Waste Industries will be closed Tuesday, December 25, 2018, in observance of Christmas and Tuesday, January 1, 2019, in observance of New Year’s Day. For the time period of December 25-28, 2018, and January 1-4, 2019, regularly-scheduled pick up will be delayed by one day.
For additional information on the holiday schedule for the Vance Granville branch, please visit the Waste Industries website by clicking here.
https://wizs.com/wp-content/uploads/2018/11/Waste-Industries-Logo.png265504WIZS Staffhttps://wizs.com/wp-content/uploads/2018/09/wizswebsitelogoimage.pngWIZS Staff2018-12-18 16:54:312018-12-18 16:54:31Waste Industries Christmas & New Year’s Pick Up Schedule
-Press Release, N.C. Department of Agriculture & Consumer Services
The N.C. General Assembly has approved extending the deadline for the agricultural disaster relief program to Dec. 20. The bill now awaits Governor Roy Cooper’s signature.
Eleven additional North Carolina counties have received secretarial disaster declarations based on agricultural losses from Hurricane Florence or Tropical Storm Michael. These counties are Anson, Avery, Dare, Person, Tyrrell, Vance, Wake, Warren, Washington, Watauga and Yadkin. With these additions, 65 counties are now eligible for agricultural disaster relief through this program.
Six counties are still awaiting a secretarial disaster declaration, which would make them eligible to participate in the disaster assistance program. These counties are Davie, Franklin, Forsyth, Rockingham, Stokes and Surry.
“We don’t want to miss any farmers that are eligible for help through this program,” said Agriculture Commissioner Steve Troxler. “To qualify for assistance, a farmer only needs to farm in a disaster-declared county. Payments from this fund will be based on county averages for loss and yield rather than individual losses.”
This assistance is available to farmers who suffered crop losses including apples, barley, corn, cotton, hay, industrial hemp, nursery crops, specialty crops, tobacco, peanuts, sweet potatoes, livestock, aquaculture and more.
https://wizs.com/wp-content/uploads/2017/07/wizsfbresize_0001s_0088_NC-Department-of-Agriculture-and-Consumer-Services-Logo.jpg.png265504WIZS Staffhttps://wizs.com/wp-content/uploads/2018/09/wizswebsitelogoimage.pngWIZS Staff2018-12-14 17:29:112018-12-14 17:29:11NC General Assembly Approves Deadline Extension for Agricultural Disaster Program
-Information courtesy Brian K. Short, Director of Emergency Operations, Henderson-Vance County Emergency Operations and Ready NC
Flash flooding and river flooding are expected for all of central North Carolina through early next week.
Periods of heavy rain are expected during this time. Flash flooding will be possible, especially in urban areas and the usual poor drainage areas.
River flooding is possible on many of the main stem rivers. Melting snow may aggravate the situation and increase the risk of flash flooding and subsequent river flooding.
Storm total rainfall amounts of 1.5” to 2.5” are expected, with locally higher amounts possible Friday through Saturday. The heaviest rain is expected Friday evening through Saturday morning.
Overall, minor flooding is expected on most main stem rivers, with the potential for the greatest rises along portions of the Neuse and the Cape Fear Rivers.
https://wizs.com/wp-content/uploads/2017/09/national-weather-service-logo.jpg266504WIZS Staffhttps://wizs.com/wp-content/uploads/2018/09/wizswebsitelogoimage.pngWIZS Staff2018-12-14 17:28:462018-12-14 17:28:46Elevated Flood Risk for All of Central NC Through Early Next Week
